Leak Detection Albert Park
Hidden leaks found with thermal imaging, acoustic tools and pressure testing. Serving every street in Albert Park, about 3 km south of the CBD, day and night.
- Licensed & insured
- Fixed upfront prices
- 24/7, no call centre
What's usually behind it in Albert Park
In older Albert Park homes, leaks often come from galvanised pipes rusting through inside walls, or from joins on lead and copper mixes.
A high water bill or a damp patch with no obvious cause usually means a hidden leak in a wall, under a slab or in the yard. We use thermal cameras, acoustic listening gear and pressure tests to pin it down before opening anything up.
Albert Park's grand Victorian homes often have extensions, multiple bathrooms and original drains that were never replaced.
When to call
- A water bill much higher than usual
- The water meter moving with all taps off
- Damp patches, bubbling paint or mould
- The sound of running water when nothing is on
- Warm spots on the floor (a hot water leak)
Leak Detection work we do in Albert Park
- Water meter testing
- Thermal imaging
- Acoustic leak detection
- Under-slab leaks
- Shower and wall leaks
- Pool and irrigation leaks
- Leak reports for insurance
- Pipe repair after detection
How a Albert Park job runs
Confirm
We check the meter to confirm there's a leak and estimate how much water is being lost.
Isolate
We isolate sections of the system to narrow down where it is.
Pinpoint
Thermal and acoustic tools locate the leak so we only open up what's needed.
Repair
We repair the leak and can provide a written report for your insurer or water authority.
Around Albert Park
From Bridport St to the back streets near the foreshore, we cover all of Albert Park 3206.
Albert Park is in the City of Port Phillip, about 3 km south of the CBD, in Melbourne's inner city.
- Postcode
- 3206
- Council
- City of Port Phillip
- Housing
- Victorian and edwardian homes
- Area
- Inner Melbourne
Other services in Albert Park
Leak Detection in Albert Park: common questions
Can you find a leak without breaking walls?
Usually, yes. Thermal and acoustic tools let us pinpoint the leak, so we only open the small area needed.
Will I get a report for insurance?
Yes. We can provide a written leak report with photos for your insurer.
Can I get a rebate on my water bill?
Water authorities may offer a leak allowance once the leak is repaired. Our report helps with that claim.
How do I check for a leak myself?
Turn off every tap, note the water meter reading, wait 30 minutes without using water and check again. If it moved, call us.