Leak Detection Burnside
Local leak detection for Burnside homes, units and businesses. Licensed plumbers, fixed prices, any hour.
- Licensed & insured
- Fixed upfront prices
- 24/7, no call centre
What's usually behind it in Burnside
In newer Burnside homes, leaks often come from shower bases, push-fit joints and flexible hoses that failed early. We find them without ripping out tiles.
A high water bill or a damp patch with no obvious cause usually means a hidden leak in a wall, under a slab or in the yard. We use thermal cameras, acoustic listening gear and pressure tests to pin it down before opening anything up.
Burnside is one of Melbourne's newer growth areas, with most homes built in the last 20 years. Jobs here are more often hot water, gas appliances, blocked fixtures and builder defects than worn-out pipes.
When to call
- A water bill much higher than usual
- The water meter moving with all taps off
- Damp patches, bubbling paint or mould
- The sound of running water when nothing is on
- Warm spots on the floor (a hot water leak)
Leak Detection work we do in Burnside
- Water meter testing
- Thermal imaging
- Acoustic leak detection
- Under-slab leaks
- Shower and wall leaks
- Pool and irrigation leaks
- Leak reports for insurance
- Pipe repair after detection
How a Burnside job runs
Confirm
We check the meter to confirm there's a leak and estimate how much water is being lost.
Isolate
We isolate sections of the system to narrow down where it is.
Pinpoint
Thermal and acoustic tools locate the leak so we only open up what's needed.
Repair
We repair the leak and can provide a written report for your insurer or water authority.
Around Burnside
We cover every street in Burnside 3023, and we're often working in neighbouring Albanvale, Caroline Springs and Kings Park.
Burnside is in the City of Melton, about 20 km west of the CBD, in Melbourne's western suburbs.
- Postcode
- 3023
- Council
- City of Melton
- Housing
- Newer homes and townhouses in recent estates
- Area
- Western Suburbs
Other services in Burnside
Leak Detection in Burnside: common questions
Can you find a leak without breaking walls?
Usually, yes. Thermal and acoustic tools let us pinpoint the leak, so we only open the small area needed.
Will I get a report for insurance?
Yes. We can provide a written leak report with photos for your insurer.
Can I get a rebate on my water bill?
Water authorities may offer a leak allowance once the leak is repaired. Our report helps with that claim.
How do I check for a leak myself?
Turn off every tap, note the water meter reading, wait 30 minutes without using water and check again. If it moved, call us.